|
|
Post by Ben on Sept 4, 2009 10:58:03 GMT -5
1 Attachments:
|
|
|
|
Post by Ben on Sept 4, 2009 10:58:19 GMT -5
2 Attachments:
|
|
|
|
Post by Ben on Sept 4, 2009 10:58:53 GMT -5
3 Attachments:
|
|
|
|
Post by Ben on Sept 4, 2009 10:59:10 GMT -5
4 Attachments:
|
|
|
|
Post by Ben on Sept 4, 2009 10:59:27 GMT -5
5 Attachments:
|
|
|
|
Post by Ben on Sept 4, 2009 10:59:43 GMT -5
6 Attachments:
|
|
|
|
Post by Ben on Sept 4, 2009 11:00:11 GMT -5
7 Attachments:
|
|
|
|
Post by Ben on Sept 4, 2009 11:00:28 GMT -5
8 Attachments:
|
|
|
|
Post by Ben on Sept 4, 2009 11:00:44 GMT -5
9 Attachments:
|
|
|
|
Post by Ben on Sept 4, 2009 11:01:05 GMT -5
10 Attachments:
|
|
|
|
Post by Ben on Sept 4, 2009 11:01:22 GMT -5
copy Attachments:
|
|
|
|
Post by Ben on Sept 16, 2009 10:59:45 GMT -5
Wene doing this boat i use 1/4 ply from home depot its 6 bucks a sheet comes in a 3x5' sheets you should use 3, on average i use about 8 to 12 oz. of epoxy for the build i recommend west systems but any kind from your hobby store should work i would get at least a 30min though seems to have better strength and doesnt blush if your in high humidity and a roll of duct tape and lots of clamps, i also go down the inside of the keel with strip of fibercloth or even to be cheaper joint cloth for drywall then cover it in epoxy seems to be fine i use these hulls in open water and at the beach playing in waves and never had problems Attachments:
|
|
|
|
Post by Ben on Sept 16, 2009 11:08:04 GMT -5
2 Attachments:
|
|
|
|
Post by Ben on Sept 16, 2009 11:08:21 GMT -5
3 Attachments:
|
|
|
|
Post by Ben on Sept 16, 2009 11:08:37 GMT -5
4 Attachments:
|
|
